Faq

Frequently Asked Questions

  • What are the specifications of our TITAN (D5)
    The TITAN sliding gate motor range are stylish hardwares with splendid ensembles tested and trusted for gates up to 500 Kilogrammes.It comes with a backup battery in event of power outage alongside an LCD Controller that displays instruction set during and after setup.

    SPECIFICATION

    Input voltage: 90 - 240V AC +/-10%, 50Hz
    Motor voltage: 12V DC
    Motor power supply: Battery-driven – 2A charger
    Push force – rated: 17kgf
    Gate speed at push force: < 5kgf 22m/min
    Gate speed at rated push force: 18m/min
    Duty cycle - mains present: 50%
    Duty cycle - mains present: 150
    Duty cycle - mains present: 500kg
    Duty cycle - mains present: code-hopping,multichannel, 433MHz, capacity - 500 transmitter buttons

    With green energy compatibility option.
  • What are the specifications of our BRAVO (D10)
    The Bravo range of sliding gate motors are exclusively designed for industrial and commercial applications for gate up to 1000kg.It uses a battery-driven high-torque 24V DC motor, coupled to a robust gearbox for utmost efficiency.

    SPECIFICATION

    Input Voltage: 90 - 240V AC +/- 10%, 50Hz
    Motor Voltage: 24V DC
    Motor Power Supply: Battery-driven - (standard capacity 2 x 7Ah )
    Push Force - Rated: 30kgf
    Gate Speed (varies with load): 22 - 26m/min
    Duty Cycle - Mains Present: 45%
    Daily Operations - Max: 750
    Gate Mass - Max: 1000kg

    Onboard Receiver Specification code-hopping, multichannel, 433MHz, capacity - 500 transmitter buttons.
    With green energy compatibility option.
  • What are the specifications of our BRAVO PRO (D10 TURBO)
    The BRAVO PRO series are super fast high-speed industrial sliding gate motor at your gate. This beast will move a gate weighing up to 1000kg and, depending on the weight of the gate, can reach speeds of up to 50 metres per minute.

    SPECIFICATION

    Input Voltage: 90 - 24V AC, 50Hz
    Motor Voltage: 24V DC
    Motor Power Supply: Battery-driven - (standard capacity 2 x 7Ah)
    Push Force - Rated: 15kgf
    Gate Speed (varies with load:) 40 - 50m/min
    Duty Cycle - Mains Present: 25%
    Daily Operations - Max: 750
    Gate Mass - Max: 240-1000kg (depending on speed settings)
    Onboard Receiver Specification AUTOMATION UNIVERSE code-hopping, multichannel, 433MHz, capacity - 500 transmitter buttons
  • What are the specifications of our CONQUEROR PRO (D2 TURBO)
    The conqueror range of sliding gates are basically for industrial applications forgates up to 2000kg.It uses uses a three-phase motor, thanks to the inverter, it still connects to a standard 220V AC single-phase supply making the unit the ideal gate motor for virtually domestic and industrial application. The clever design of the mechanical aspects makes installation quick and easy. In addition to the already exceptional benefits of the standard A10 industrial sliding gate motor, an optional DC converter module can be added to give battery backup.

    SPECIFICATION

    Input Voltage: 220 - 240V AC +/- 10%, 50Hz [*] (single phase)
    Motor Voltage: 380V AC Three-Phase
    Push Force - Rated - Standard Speed: 30kgf
    Push Force - Rated - Sprint Speed: 22.5kgf
    Gate Speed at Rated Push Force - Standard Speed: 13.6m/min
    Gate Speed at Rated Push Force - Sprint Speed: NA
    Duty Cycle: 80%
    Gate Mass - Max - Standard Speed: 1000kg - 2000kg
    Gate Mass - Max - Sprint Speed: N/A

    With green energy compatibility option.
  • What are the specifications of our POLO PHONES
    This is a wired version of audio intercom system.

    SPECIFICATION:

    Input Voltage 1: 12V – 14V DC supplied at anyone of the components 1
    Current Draw: Quiescent – 150mA ±60mA for a One-to-One kit maximum – 200mA
    Speech Volume: Adjustable at each Entry Panel and handset
    Wiring: Two common wires polarised for speech, call and lock release
    Ring tone: Electronic while button is depressed with separate tones when calling from each Entry

    Panel in a system or between groups of handsets Call Confirmation at Entry Panel: If the 12V DC gate motor supply dips when the motor starts up and the intercom is being

    used at the same time, the speech quality might be affected. Wiring Distance: Refer to thickness chart in the Manual
    Gate/Door Release: Potential-free normally-open contact
    Handset Auxiliary Contact: Requires separate wiring via two-wire bus
    Operating Temperature: -20°C to +50°C
    Humidity: 0 – 90% (non-condensing)
    Degree of Protection: IP55

    Packaging Dimensions:

    Handset: Length: 70mm x Width: 47mm x Height: 211mm
    Entry Panel: Length: 70mm x Width: 40mm x Height: 150mm
  • My gate opens, but then won't close.
    Check that the green IRB LED is on. If not, find out why.
  • My gate won't operate.
    Are the green IRB and LCK LED’s lit? If not, determine why. When the gate is triggered, does the red TRG led light? If not, determine why. Are any of the red diagnostic LED’s permanently on? If so, determine why.
  • What is PIRAC mode?
    PIRAC is an abbreviation for Passive Infra Red Auto Close. It is a mode of operation which will cause the gate to close immediately the infra red beam is cleared after an object has entered the beam. Any trigger to the control card will cause a closed or closing gate to open. If already opening, the trigger signal is ignored. If the gate is opened, but the beam is not broken, then the gate will immediately start closing when it reaches its programmed, fully open end point. It is thus a high security mode.
  • What is CONDOMINIUM mode?
    This is a mode of operation which is used typically in townhouse complexes or business sites where there could be many people all trying to control the operation of a gate at the same time. With Condominium mode selected all trigger inputs will have the effect of opening a closed, or closing gate, but will be ignored if the gate which is already opening. This implies that it is not possible to give a trigger to close a gate which is open. The controller automatically installs “auto close” and it is the auto close timer which causes the gate to close. The auto close time can be adjusted from 1 to 255 seconds. (In this mode it is not possible to make use of the auto close override feature of the Centurion controllers). Any trigger signals given during the period when the gate is in fully open position have the effect of restarting the auto close countdown.
  • What are the specifications of our CONQUEROR LITE
    The CONQUEROR LITE range of sliding gates within industrial category for application up to 1000kg.

    SPECIFICATION

    Input Voltage: 220 - 240V AC +/- 10%, 50Hz [*] (single phase)
    Motor Voltage: 380V AC Three-Phase
    Push Force - Rated - Standard Speed: 30kgf
    Push Force - Rated - Sprint Speed
    Gate Speed at Rated Push Force - Standard Speed: 13.6m/min
    Gate Speed at Rated Push Force - Sprint Speed: 30m/min.
    Duty Cycle: 80%
    Gate Mass - Max - Standard Speed: 1000kg 2000kg
    Gate Mass - Max - Sprint Speed: 600kg

    With green energy compatibility option.
  • What are the specifications of our CLASSIC (D2 TURBO)
    The classic range of low voltage sliding gate.Cost effective for domestic gate weighing up to 250kg with a operating speed of 400mm per second and powerful peak push force rated at 9kgf.

    SPECIFICATION

    Technical Data: Input voltage 1: 90V– 240V AC ±10%, 50Hz
    Motor voltage: 12V DC
    Motor power supply 4: Battery-driven (standard capacity - 12V 5Ah)
    Current consumption (mains): Intergral with controller 1A @ 13.7V +/- 1%
    Current consumption (motor at rated load): 8/12A
    Current consumption (quiescent load): 95mA
    Operator push force
    Starting: 18kgf
    Rated: 8kgf
    Gate mass – maximum: 250kg
    Gate length - maximum: 20m
    Gate speed - m/min 6: 22 - 26m/min
    Gate speed - mm/sec: 367 - 433mm/sec
    Drive Pinion: 17T Module 4
    Maximum daily cycle: 10 cycles/day
    Design life: 30 000 cycles

    Operations in standby with standard battery 4, 5

    Half day: 60 cycles
    Full day: 40 cycles
    Collision sensing: Electronic
    Operating temperature: -15°C to +50°C
    Degree of protection: IP54
    Controller incorporated: D2 Controller_H
    Onboard receiver type: NOVA code-hopping onboard, multichannel
    Receiver frequency: 433.92MHz
    Receiver code storage capacity: 32 transmitter buttons
    Mass of unit packed: 5kg
    Packaging dimensions: Length: 255mm x Width: 188mm x Height: 333mm
  • What are the specifications of our CLASSIC PRO (D2 TURBO LOW VOLTAGE)
    Turbo Low-Voltage operator is designed specifically for sites with no mains at the gate to reduce installation costs while delivering outstanding reliability, comprehensive functionality and selectable high-security or standard speeds. With the D2 Turbo Low-Voltage, there is no need for costly high-voltage cable runs and expensive isolators. Simply use a low-voltage step-down transformer or solar power supply. Now that’s fast! Sleek, strong, stylish.

    SPECIFICATION

    Technical Data
    Input voltage 1: 10V - 20V AC ±10%, 50Hz; 10V - 28V DC
    Motor voltage: 12V DC 3
    Motor power supply 4: Battery-driven (standard capacity - 12V 5Ah)
    Current consumption (mains): Intergral with controller 1A @ 13.7V +/- 1% (Input voltage > 15V AC)
    Current consumption (motor at rated load): 8/12A 8/12A
    Current consumption (quiescent load): 95mA
    Operator push force
    Starting 1: 18kgf
    Rated: 8kgf
    Gate mass – maximum: 250kg
    Gate length - maximum: 20m
    Gate speed - m/min 6: 22 - 26m/min
    Gate speed - mm/sec: 367 - 433mm/sec
    Drive Pinion: 17T Module 4
    Maximum daily cycle: 10 cycles/day
    Design life: 30 000 cycles

    Operations in standby with standard battery 4, 5

    Half day: 60 cycles
    Full day: 40 cycles
    Collision sensing: Electronic
    Operating temperature: -15°C to +50°C
    Degree of protection: IP54
    Controller incorporated: D2 Controller_L
    Onboard receiver type: NOVA code-hopping onboard, multichannel
    Receiver frequency: 433.92MHz
    Receiver code storage capacity: 32 transmitter buttons
    Mass of unit packed: 5kg
    Packaging dimensions: Length: 255mm x Width: 188mm x Height: 333mm

    With green energy compatibility option.
  • What are the specifications of our EAGLE
    The BUNDELSLIGA elegant series of three phase sliding gate motor are for heavy duty applications for up 2200kg.This Models are available for rack and pinion or chain drive.

    SPECIFICATION

    POWER DIET

    Power supply voltage: 380-415V~ 3 50/60 Hz
    Motor: Three-phase with four poles
    Max. power: 950 W
    Max. torque: 62 Nm
    Max. expressed force: 2500 N (Z12) - 1900 N (Z16) - 1500 N (Z20)
    Reduction ratio: 1:30
    Max. leaf width: 40 m (Z16) - 50 m (Z20)
    Speed adjustment and motor control: No
    Limit switch: Inductive with metal sheet
    Pinion: No
    Encoder: No
    Force adjustment: Twin-disk clutch in oil-bath
    Operating ambient temperature: -20°C ÷ +55°C
    Thermal protection: 155°C
    Protection class: IP44
    Weight: 15 Kg
    Type of oil: FAAC HP OIL
    Dimensions (LxDxH): 275 x 191 x 387 mm
    Max. leaf weight: 2,200 Kg (Z12) - 1,600 Kg (Z16)
    Usage frequency: 70%
  • What are the specifications of our EAGLE PRO
    These series are designed extreme industrial application up to 3,500kg

    SPECIFICATION

    Power supply voltage: 380-415V~ 3 50/60 Hz
    Motor: Three-phase with four poles
    Max. power: 850 W
    Max. torque: 0 ÷ 155 Nm (*)
    Max. expressed force: 3.200 N (*)
    Reduction ratio: 1:43,2
    Max. leaf width: 42 m
    Speed adjustment and motor control: No
    Limit switch: Roller lever micro switch
    Pinion: No
    Encoder: No
    Force adjustment: Twin-disk clutch in oil-bath
    Operating ambient temperature: -20°C ÷ +55°C
    Thermal protection: 155°C
    Protection class: IP55
    Weight: 50 Kg
    Type of oil: FAAC HP OIL
    Dimensions (LxDxH): 430 x 310 x 586 mm
    Max. leaf weight: 3,500 Kg
    Use frequency: 100% (up to 2,000 Kg) - 50% (over 2,000 Kg)
  • How do I secure the mounting bracket for steel rack installations?
    It is advisable to use four separate weld points when mounting the bracket to the rack.
  • What is PCM?
    P.C.M. is an abbreviation for Positive Close Mode. It is a mode which can be selected to close a gate up against an end stop. In this mode the gate will slow down normally; then continue to run until it strikes a physical end stop. If there is no end stop the gate will continue to run for approximately 350mm and then stop. Its main use is to ensure that a gate is always closed to an exact position so that, say, a magnetic limit switch will make reliable contact.
    WARNING: Care must be exercised in this mode because the gate will not reverse from the instant that the gate starts its slow down ramp till it is fully closed. Thus any object in this region of the gate travel will be trapped. It is highly recommended that infra red beams are fitted if this mode is selected. The IR beams are effective up to the point that the gate stops.
  • How many times can I open my D5-Evo / D5 / D3 operated gate with mains power failure?
    This depends on the weight of the gate, the rolling friction (or pull force applied), the length of the gate and the size of the battery. As a rough guide a typical gate of approximately 4-5 metres, on round rail with good quality wheel bearings, using a 7A/H battery, will open and close approximately 15 times.
  • Why use DC motor or battery operated motor on a gate opener?
    1. A DC motor has excellent starting torque (much greater than an AC motor). This high starting torque is ideal to overcome the initial friction of getting the gate moving and accelerating the gate up to speed.
    2. The speed of a DC motor is easily controlled and thus a gate can be softly ramped up to speed and slowed down as required (see the D5 motor).
    3. The DC motor is more efficient than comparable AC motors thus virtually eliminating shutdown due to over – temperature.
    4. With a battery the gate can be operated a limited number of times in total power failure conditions (actual number of operations depends on the capacity of the battery).
    5. In areas of no AC mains power a solar panel can be used to charge a battery. Typical applications are farming communities, or high security sites located on mountainous areas, etc.

Didn’t find your answer? Submit your question